LD Systems DDQ SUB 212 - 2 x 12

LD Systems DDQ SUB 212 - 2 x 12" active PA Subwoofer with DSP

Цена без ДДС:2,992.71лв.
Цена с ДДС:3,591.25лв.
Тегло: 34.500 кг

LD Systems DDQ SUB 212 - 2 x 12" active PA Subwoofer with DSP

Ориентировъчни цени за доставка

До София на цена от 20.59лв.Извън София на цена от 29.81лв.
До София на цена от 38.70лв.Извън София на цена от 38.70лв.


Поръчайте на телефон +359 2 423 9090 или имейл sales@cinemaservices.eu - доставка до 30 дни.

Изпрати на приятелОцени продукта
Добави в желани Сравни

LD Systems DDQ SUB 212 - 2 x 12" active PA Subwoofer with DSP


The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12" bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of other manufacturers.

The two woofers with 3" coils and neodymium magnets are driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply and a RMS output of 1400 watts. The DDQ Sub 212 attains a maximum sound-level pressure of 132 dB over a frequency response curve of 38 - 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers has a large dynamic range of 127dB/113 dB (ADC/DAC) and handles frequency and phase correction in addition to providing extensive protection functions for reliable operation. Its 1ms look ahead limiter provides for distortion-free reproduction even at maximum volume levels. Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. The inputs and outputs as well as the separate mono output with a 100Hz high-pass filter use Neutrik XLR sockets. Additional features are LED function indicators and a ground lift switch; the volume and preset encoders can be deactivated to prevent inadvertent adjustment.

The compact band-pass enclosure of the DDQ Sub 212 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is prepared for mounting of casters and features comfortable handles and two M20 threaded flanges.

Product number: LDDDQSUB212
Product type: PA subwoofer
Type: active
Design: DSP controlled
Low/mid driver dimensions: 2 x 12"
Low/mid driver dimensions (mm): 2 x 304.8 mmmm
Woofer magnet: Neodymium
Woofer brand: Custom-made
Woofer voice coil: 3"
Woofer voice coil (mm): 76.5mm
Amplifier: Class D
RMS: 1400 (2 x 700)W
Frequency response: 38 - 120Hz
Max. SPL (continuous): 124dB
Max. SPL (peak): 132dB
Protection circuits: RMS power supply limiter, short circuit, RMS speaker limiter, over-current, DSP-based "look ahead" limiter
Controls: DSP presets, Power, ground lift, DSP/ Gain enable, Gain
Indicators: Operate, DSP/ Gain disable, Peak Limit, signal
Line inputs: 2
Line input connectors: XLR
Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectors: XLR
Operating voltage: Switching Power Supply, 180 - 264 V ~ / 47 - 63 Hz
Cabinet material: 18 mm Plywood
Cabinet surface: Polyurethane
Cabinet construction: Bandpass
Width: 420mm
Height: 620mm
Depth: 543mm
Weight: 34.5kg
Features: 2 x threaded flange (M20), 3 x corner handles, 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), prepared for mounting of casters
Върни До Горе